- Catalog Home
- Towing
- Towing Accessories
- Taillight Converter
- 119147 Tail Light Converter
Tekonsha
119147 Tail Light Converter
This product has a non-specific fitment that may not be made for a given vehicle. Modifications may or may not be needed to use this product on your vehicle. Please check the product description below.
Product Description
ModuLite® all the additional power required to supply the trailer lights is supplied directly from the battery. Only a small amount of power is required from the fuse panel, turn signal switch, taillight harness and lamp out sensor if so equipped, to signal when to illuminate the trailer lights.
- Draws Power Directly From The Vehicle Battery And Uses Less Than 5 Milli Ampere Of The Vehicle Circuit For Sensing To Turn The Trailer Functions On And Off
- Will Work With Either LED Or Incandescent Bulbs. Has Integrated Re-Settable Short Circuit And Overload Protection To Safeguard Itself And The Tow Vehicle From Shorts And Installation Wiring Mishaps
- Designed Not To Send Feedback Through The Vehicle Circuits. The Trailer Brakes Will Override The Hazard Lamps When The Brake Is Activated
- The Taillight Circuit Has Been Upgraded To Work With Pulse Width Modulation (PWM) Vehicles This Will Allow The Converter To Turn On Fully And Gives The Trailer Lights Full Brightness During Activation
- Will Work With Most Vehicles That Have A Multiplex System For Lighting
- Can Be Used On A 2 Wire Or 3 Wire System. All Solid State Components In Potted Encapsulation
- Limited 1 Year Warranty
Installation Instructions
Product Attributes
Power Source | Direct Battery Powered |
Function | Converts 2 Wire System to 3 Wire System |
Ampere Rating (A) | 2.1/ 7.5 Amp |
With Circuit Protection | Yes |
Weatherproof | No |
Includes Circuit Probe | No |
Quantity | Each |
Estimated Install Time (Hours) | 1.5 |